resin cure
英 [ˈrezɪn kjʊə(r)]
美 [ˈrezn kjʊr]
树脂硫化【固化】
双语例句
- Relation of the Property of a Low Viscosity Epoxy Resin Casting Matrix to Its Degree of Cure
低粘度环氧树脂浇铸体性能与固化度的关系 - Barium PF resin cure temperature is lower than that of ordinary PF resin.
钡酚醛树脂固化温度比普通酚醛树脂低； - In this Nper, N-p-carboxylphenylmaleimide ( P-CPMI) was synthesized and the curing reaction of o-cresol formaldehyde epoxy resin with it as cure agent was investigated.
合成了N-对羧基苯基马来酰亚胺，并将其用作邻甲酚醛环氧树脂的固化剂。 - Simulation Approach of Phenolic Resin Cure for Wood Composite Manufacturing
木质复合材用酚醛树脂胶黏剂固化过程的模拟方法 - The precure process makes the resin cure to a certain extent, decreases resin flowability, improves resin processability significantly, and enhances the composite laminates quality.
预固化可使氰酸酯树脂发生一定程度的自聚反应，从而降低其流动性，可明显改善氰酸酯树脂的工艺性，提高了层板的成型质量。 - VE modified BMI resin was more reactive and thus its maximum cure temperature was decreased to180 ℃.
VE改性BMI树脂的固化活性较高，最高固化温度可降低到180℃。 - Cure Behavior of Thermosetting Resins Studied by the Dynamic Torsional Vibration Method-Application of LHX-I Resin Curemeter in Cure Study of Thermosetting Resins and Resin-based Composites
研究热固性树脂固化的动态扭振法&LHX-I型树脂固化仪在热固性树脂和树脂基复合材料固化研究中的应用 - Latest Application of Dynamic Torsional Vibration Method in the Studies of Resin Cure
动态扭振法在树脂固化研究中的最新应用 - A Process Simulation of Resin Flow and Cure during Resin Film Infusion Process
RFI工艺中树脂流动行为和固化过程分析 - A novel sensor is developed to monitor the evolution of pressure borne by reinforcing fibers, hence the viscosity evolution of the resin can be revealed indirectly during the cure process.
新型的基于光纤微弯损耗原理的光纤传感器可以在线监测复合材料生产过程中的增强纤维所承担的压力，从而间接的得出树脂基体在固化过程中的粘度发展这个复合材料生产过程至关重要的参量。 - So the powder NBR can adjust the properties of phenolic resin abrasive tool and make the abrasive tool cure at a broader range of temperature.
因此通过加入丁腈粉末可调整酚醛树脂类磨具的性能，使磨具具有一个较宽的固化温度范围。 - Monitoring for Residual Strain of Resin Cure During the Process of RTM Composites
RTM工艺成型复合材料树脂固化过程残余应变监测研究 - And the influence of the functionality of the isocyanate prepolymer and the resin blend on cure speed, cure efficiency and film properties.
异氰酸酯和胺组分官能对凝胶时间、固化效率和聚脲涂层性能的影响。 - Effect of Brominated Phenolic Resin on Cure Characteristics of EPDM
溴化酚醛树脂对EPDM胶料硫化特性的影响 - The results show that the novel resin has a cure shrinkage lower than that of typical epoxies in room temperature;
结果表明，这类新型树脂在室温下，固化收缩小于环氧树脂。 - Whether the wrapped products to obtain the ideal design strength, It not only depended on material itself performance and the proportion of fiber and resin, but also had an important relations with the resin cure process.
缠绕制品能否获得理想的设计强度，不仅与材料本身的性能以及纤维树脂的比例有关，而且与树脂的固化过程有着重要的关系。 - Main world market and technology trend of epoxy resin adhesives were reviewed, it contained room temperature cure, low temperature? speed cure, heat resistant, high strength, cationic light cure, low pollution adhesives etc.
综述了近年来环氧胶粘剂的世界主要市场和技术动向，如室温固化、低温快速固化、耐热、高强度、阳离子光固化、低公害等胶粘剂。 - S: Performance and composition of ambient cure fluoropolymer paint applied on antenna of printed board are introduced. Influence of fluoropolymer resin, cure r and additives to film performance is emphasized.
介绍了印制版天线用氟碳涂料的性能要求及其组成，重点讨论了氟碳树脂、固化剂和助剂对涂膜性能的影响，并用红外光谱手段对氟碳涂料的常温固化进行了跟踪。 - Resin synthesized by this process features short cure time, low nitrogen, low free formaldehyde and viscosity.
该工艺制备的树脂具有硬化速度快、含氮量低，游离醛低、粘度低等特点。 - A description was given to the definition of curing and cure degree of unsaturated polyester resin, to the factors affecting the cure degree and to the ways to determine the cure degree.
本文阐述UPR固化和固化程度的含义、影响固化程度的因素和评定固化程度的方法。 - The DSC analysis discovers that the modification of PF resin with hard resin cure faster than general PF.
DSC分析发现紫胶硬树脂改性酚醛树脂的放热反应温度更低一些。 - The normalized speckle spatial spectrum depended upon the variation of the refractive index occurred through the resin cure process was calculated, the approximate relation between refractive index and cutoff frequency was given.
计算了随着在树脂固化过程中折射率变化的功率谱密度分布，给出截止频率与折射率的近似关系。 - Hydroxymethyl bisphenol A epoxy Resin RT rapid Cure adhesive
羟甲基双酚A环氧树脂室温快速固化粘合剂 - A study was made on the EAM resin gel property and cure property by DSC and IR.
本文研究了EAM树脂的凝胶特性，用DSC、IR研究了树脂的固化特性。 - The resin cure experiment results measured by the fiber optic sensor were given.
给出了利用这种传感器进行复合材料固化监测的实验结果。 - The cure kinetics model is based on Kamal's model, and the degree of the resin cure as a function of temperature and time. This improved mixing dielectric model yields an excellent fit to measured data.
树脂的固化模型利用了Kamal提出的固化动力学方程，将固化度取为时间和温度的函数。 - The real time monitoring for residual strain induced by resin cure during the RTM process was realized by measuring the relationship among wave deflection, temperature and curing time.
通过光纤光栅波长偏移与温度和固化时间之间的关系测试，得到了树脂固化过程中残余应变的变化历程，成功实现了RTM工艺树脂固化过程中残余应变的在线监测。 - Study progress in shrinkage control of low profile unsaturated polyester resin during cure
国外低轮廓UPR固化收缩控制研究发展动态